No edit summary
Line 1: Line 1:
=Short Term / Small Stuff=
=Short Term / Small Stuff=


Customer Journey:
==Customer Journey==
* The top of the Edit button for a CJ is 100% aligned with the top of the CJ table rendering. Maybe move the button up or down a bit, would look better.
* The top of the Edit button for a CJ is 100% aligned with the top of the CJ table rendering. Maybe move the button up or down a bit, would look better.


PINs:
==PINs==
* Tooltip for pin at the very top not visible
* Tooltip for pin at the very top not visible
* When selecting pin in an image, the VSS details are shown on the right side only; on the left side (VSS list), the VSS API should also be selected and highlighted
* When selecting pin in an image, the VSS details are shown on the right side only; on the left side (VSS list), the VSS API should also be selected and highlighted


Media Library:
==Media Library==
* When associating an image from the library with an item like a prototype, it usually says "Upload image". In fact, to upload I have to go to the media library. So in the menu it should say "Attach image", and maybe include a link to the media library (open in new tab) so I can upload a new image if need be.
* When associating an image from the library with an item like a prototype, it usually says "Upload image". In fact, to upload I have to go to the media library. So in the menu it should say "Attach image", and maybe include a link to the media library (open in new tab) so I can upload a new image if need be.


Prototype/User Feedback
==Prototype/User Feedback==
* Still need to add "edit" functionality for "Feedback"
* Still need to add "edit" functionality for "Feedback"


Landing page (after selecting model)
==Landing page (after selecting model)==
* "CVI Catalogue" => "Interface Catalogue (CVI)" (above "Browse, enhance, and ...")
* "CVI Catalogue" => "Interface Catalogue (CVI)" (above "Browse, enhance, and ...")


VSS List
==VSS List==
* Would be good if I can select and copy the name of a VSS API ("vehicle.body...") in the API details view on the right
* Would be good if I can select and copy the name of a VSS API ("vehicle.body...") in the API details view on the right



Revision as of 07:19, 16 August 2022

Short Term / Small Stuff

Customer Journey

  • The top of the Edit button for a CJ is 100% aligned with the top of the CJ table rendering. Maybe move the button up or down a bit, would look better.

PINs

  • Tooltip for pin at the very top not visible
  • When selecting pin in an image, the VSS details are shown on the right side only; on the left side (VSS list), the VSS API should also be selected and highlighted

Media Library

  • When associating an image from the library with an item like a prototype, it usually says "Upload image". In fact, to upload I have to go to the media library. So in the menu it should say "Attach image", and maybe include a link to the media library (open in new tab) so I can upload a new image if need be.

Prototype/User Feedback

  • Still need to add "edit" functionality for "Feedback"

Landing page (after selecting model)

  • "CVI Catalogue" => "Interface Catalogue (CVI)" (above "Browse, enhance, and ...")

VSS List

  • Would be good if I can select and copy the name of a VSS API ("vehicle.body...") in the API details view on the right

Medium Term

Prototype/Code

  • Add list of used APIs + wishlist for this prototype
  • Support "add sample code"-button

VSS List - Add filter "Show all" | "VSS Standard" | "Wishlist"

Integration

  • Plug-ins
  • Data Broker

Playground Markup

  • In addition to {{}}, we should also consider supporting bullet poins like in media wiki (for CJ definitions, EA components, user feedback, etc.)

Long Term

  • Social Media Integration / LinkedIn

DONE

  • Add here...